Repairing servos on Speedo MKII

I used Futaba S3114 servos for the ailerons.

servo centered, airleron taped straight

servo centered, airleron taped straight

i hope this blue tape keeps the CA from flowing into the horn

i hope this blue tape keeps the CA from flowing into the horn

used a servo testing tool to keep the servo horn from moving while gluing

used a servo testing tool to keep the servo horn from moving while gluing

clamped together with some balsa on the bottom to press servo evenly

clamped together with some balsa on the bottom to press servo evenly

this is clean

this is clean

Leave a Reply

*
Powered by WordPress | Designed by Elegant Themes